LOCTITE CORP -- ANTISEIZE COMPOUND, 767-70  -- 8030-00-286-5453
<pre>=====================  Product Identification  =====================

Product ID:ANTISEIZE COMPOUND, 767-70
MSDS Date:03/27/1996
FSC:8030
NIIN:00-286-5453
=== Responsible Party ===
Company Name:LOCTITE CORP
Address:1001 TROUT BROOK CROSSING
City:ROCKY HILL
State:CT
ZIP:06067-3910
Country:US
Info Phone Num:203-571-5100
Emergency Phone Num:203-571-5100
Preparer's Name:CHEMICAL COMMODITIES
CAGE:7K128
=== Contractor Identification ===
Company Name:LOCTITE CORP
Address:705 N MT RD
City:NEWINGTON
State:CT
ZIP:06111
Country:US
Phone:312-689-6200
CAGE:7K128
Company Name:LOCTITE CORPORATION
Address:1001 TROUT BROOK CROSSING
Box:City:ROCKY HILL
State:CT
ZIP:06067-3910
Country:US
Phone:860-571-5100
CAGE:05972

=============  Composition/Information on Ingredients  =============

Ingred Name:GRAPHITE
CAS:7782-42-5
RTECS #:MD9659600
Fraction by Wt: 20%
OSHA PEL:15 MPPCF
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:MINERAL OIL, HYDROTREATED (SEVERE), HEAVY NAPHTHENIC
    DISTILLATE; (HYDROTREATED PETROLEUM DISTILLATES)
CAS:64742-52-5
RTECS #:PY8035001
Fraction by Wt: 25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 25%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:DISTILLATES, ACID-TREATED HEAVY NAPHTHENIC (SEVERE
    SOLVENT-REFINING AND/OR HYDROTREATMENT); (PETROLEUM DISTILLATE)
CAS:64742-18-3
RTECS #:PY8032001
Fraction by Wt: 15%
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:SILICA, CRYSTALLINE - QUARTZ; (SILICON DIOXIDE
    (ENCAPSULATED))
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 0.2%
OSHA PEL:SEE TABLE Z-3
ACGIH TLV:0.1 MG/M3 RDUST

Ingred Name:CALCIUM TALLOWATE; (FATTY ACIDS, TALLOW, CALDIUM SALTS)
CAS:64755-01-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINERAL OIL, HYDROTREATED (SEVERE), PETROLEUM DISTILLATE,
    HEAVY PARAFFINIC; (HYDROTREATED HEAVY PARAFFINIC DIST)
CAS:64742-54-7
RTECS #:PY8035501
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:EFTS OF OVEREXP: INHAL OF FREE RESP SILICA MAY CAUSE
    SILICOSIS/OTHER SERIOUS DELAYED LUNG INJURY. SILICA MAY BE (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8: RELEASED BY GRINDING/MACHINING OF COATED MATLS. NO
    EXPOS TO FREE METAL POWDER IS ANTIC DURING NORM (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: APPLICATION OF THIS PROD. METAL POWDER MAY BE
    RELEASED, HOWEVER, BY GRINDING/MACHINING OF CURED CMPD OR (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10: COATED SURF. RPTD/PRLNG OVEREXP TO METAL DUST MAY
    CAUSE METAL-FUME FEVER, METALLIC TASTE & DISCOLORATION(ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11: OF SKIN & HAIR. REFER TO PROTECTIVE EQUIPMENT
    SECTION FOR APPROPRIATE PROTECTIVE MEASURES.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SLIGHTLY IRRIT BUT DOES
    NOT INJURY EYE TISS. SKIN: PRLNG/RPTD CONT MAY CAUSE IRRIT. INHAL:
    DUST AT LEVELS ABOVE REC EXPOS LIMS MAY CAUSE METALLIC/SWEET TASTE,
    IRRIT OF PHARYNX, & POSS ULC ERATION W/PERFORATION OF NASAL SEPTUM.
    INGEST: MOD TOX. IRRIT TO MOUTH, THROAT & STOM, W/NAUS. (EFTS OF
    OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC MONO,
    VOL 68, 1997: GROUP 1. NTP 7TH ANNUAL RPT ON CARCINS, 1994: ANTIC
    TO BE (SUP DAT)
Effects of Overexposure:HLTH HAZ: CHRONIC: RPTD & PRLNG INHAL OF
    GRAPHITE/CARBON DUSTS MAY CAUSE PULM FIBROSIS, EMPHYSEMA, &
    PNEUMOCONIOSIS. SEV OF THESE EFTS IS GREATLY INFLUENCED BY PRESENCE
    OF OTHER HARMFUL MINERAL DUSTS,  MOST NOTABLY CRYSTALLINE SILICA.
    NO EXPOS TO FREE RESP SILICA IS ANTIC DURING NORM USE OF THIS PROD.
    (ING 8)
Medical Cond Aggravated by Exposure:PREEXISTING PULMONARY AND
    DERMATOLOGICAL DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO HAZARDOUS
    COMPONENTS.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. GET
    MED ATTN IF IRRIT PERSISTS. SKIN: WASH W/SOAP & WATER. GET MED ATTN
    IF IRRIT DEVELOPS/PERSISTS. INHAL: REMOVE TO FRESH AIR & GET MED
    ATTN I F COUGH/OTHER SYMPS DEVELOP. INGEST: DONOT INDUCE VOMIT.
    GIVE A GLASS OF WATER/MILK. CALL MD/POIS CTL CTR IMMED. NEVER GIVE
    ANYTHING BY MOUTH TO AN UNCON PERS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:300F,149C
Lower Limits:1.0%
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP . USE
    WATER TO COOL EXPOSED CONTRS. WATER STREAM DIRECTED INTO FIRE MAY
    CAUSE FROTHING W/SPREAD OF FLAME.
Unusual Fire/Explosion Hazard:FINELY DIVIDED DUST IN AIR MAY PRESENT
    EXPLO HAZ. PVNT DUST BUILD-UP. CLSD CONTRS MAY RUPTURE/EXPLODE (DUE
    TO PRESS BUILD-UP) WHEN EXPOSED TO EXTREME (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECLAIM CLEAN MATERIAL. CONTAMINATED MATERIAL
    SHOULD BE SWEPT OR SHOVELED INTO APPROPRIATE WASTE CONTAINER AND
    DISPOSED OF IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL
    REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED OR REPEATED CONTACT
    WITH SKIN. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY. STORE
    AWAY FROM HEAT. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT REUSE EMPTY CONTAINERS WITHOUT COMMERCIAL
    CLEAN OR RECONDITION. FOLLOW ALL MSDS/LABEL PRECAUTIONS EVEN AFTER
    CONTAINER IS EMPTIED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED UNDER GENERAL VENT. IF
    EXPOSURE LEVELS ARE UNKNOWN, IF LEVELS EXCEED TLV/PEL, OR IF
    EFFECTS OCCUR, USE NIOSH APPROVED DUST/MIST RESPIRATOR I/A/W HEALTH
    & SAFETY REGULATIONS & MA NUFACTURER'S RECOMMENDATIONS.
Ventilation:GENERAL VENTILATION USUALLY ADEQUATE.
Protective Gloves:CLOTH OR SYNTHETIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . CLEAN CLOTHING TO COVER SKIN.
Work Hygienic Practices:WASH HANDS BEFORE EATING. FOLLOW GENERAL
    INDUSTRIAL SAFETY PRACTICES DURING USE.
Supplemental Safety and Health
EXPLO HAZ: HEAT. IRRIT &/OR TOX GASES/FUMES MAY BE GENERATED BY THERMAL
    DECOMP/COMBUST. MATLS TO AVOID: PALLADIUM, SELENIUM, MANGANESE,
    MAGNESIUM + POTASSIUM CHLORATE, SODIUM CARBONATE, SULFATES, DIBO
    RANE. EXPLAN OF CARCIN: CARCIN: HUMAN: LUNG.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>550F,>288C
Vapor Density:HVR/AIR
Spec Gravity:1.3017
Evaporation Rate &amp; Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:COPPER COLORED PASTE WITH SLIGHT PETROLEUM ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG LEWIS/MINERAL ACIDS. STRONG BASES/OXIDANTS. NITRATES, NITRITES,
    CHLORINATED HYDROCARBONS, CHLORIDES, (SUP DAT)
Stability Condition to Avoid:PROLONGED EXPOSURE TO HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON. VARIOUS
    HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REVIEW ALL CURRENT FEDERAL, STATE, AND LOCAL
    REGULATIONS REGARDING HEALTH AND DISPOSAL FOR APPROPRIATE DISPOSAL
    PROCEDURES. INCINERATION PREFERRED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.