PERMATEX INDUSTRIAL -- FAST CURE EPOXY MIXERCUPS, 82234  -- 8040-00N056469
<pre>=====================  Product Identification  =====================

Product ID:FAST CURE EPOXY MIXERCUPS, 82234
MSDS Date:01/04/1993
FSC:8040
NIIN:00N056469
=== Responsible Party ===
Company Name:PERMATEX INDUSTRIAL
Address:705 N MOUNTAIN RD
City:NEWINGTON
State:CT
ZIP:06111
Country:US
Info Phone Num:800-641-7376
Emergency Phone Num:203-278-1280
Preparer's Name:STEPHEN REPETTO
CAGE:62377
=== Contractor Identification ===
Company Name:PERMATEX INDUSTRIAL
Address:HARTFORD SQUARE N 10 COLUMBUS BLVD
Box:City:HARTFORD
State:CT
ZIP:06106
Country:US
Phone:877-376-2839
CAGE:62377

=============  Composition/Information on Ingredients  =============

Ingred Name:RESIN (CONSISTING INGS 2 - 5). SPEC GRAV:1.68.
RTECS #:9999999ZZ
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (EPOXY RESIN)
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 45-50%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALUMINUM HYDROXIDE; (ALUMINUM HYDROXIDE, HYDRATED)
CAS:21645-51-2
RTECS #:BD0940000
Fraction by Wt: 45-50%
OSHA PEL:15 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5-10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:SILICA, AMORPHOUS (FUMED); (SILICA, AMORPHOUS TREATED)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 1-3%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:HARDENER (CONSISTING OF INGS 7 - 13). SPEC GRAV:1.4.
RTECS #:9999999ZZ
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALUMINUM HYDROXIDE; (ALUMINUM HYDROXIDE, HYDRATED)
CAS:21645-51-2
RTECS #:BD0940000
Fraction by Wt: 45-50%
OSHA PEL:15 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

Ingred Name:POLYMERCAPTAN
CAS:101359-87-9
Fraction by Wt: 30-35%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL)-; (SUBSTITUTED
    AMINOPHENOL)
CAS:90-72-2
RTECS #:SN3500000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:AROMATIC HYDROCARBONS; (AROMATIC PLASTICIZER)
CAS:70955-17-8
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:STYRENE; (STYRENE MONOMER)	(SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 5-10%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM;100 STEL, S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:SILICA, AMORPHOUS (FUMED); (SILICA, AMORPHOUS TREATED)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 1-3%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:ETHYLENE GLYCOL  (SARA III). LEL:3.2%. UEL:15.3%.
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1-3%
OSHA PEL:50 PPM, C (MFR)
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:VOLATILE ORGANIC COMPONENT (EPA METHOD 24): RESIN: 0.47%.
    HARDENER: 14.3%.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:EYE & SKIN IRRITANT. MODERATE TOXICITY
    BY INGESTION. MAY CAUSE DERMATITIS ON PROLONGED CONTACT IN
    SENSITIVE INDIVIDUALS. TARGET ORGANS & OTHER HLTH EFTS: ING
    2:IRRITANT, MUTAGEN. ING 3:KIDNEY, LUNG. I NG 4:IRRITANT. ING
    5:LUNG. ING 7:KIDNEY, LUNG. ING 9:IRRITANT. ING 11:BEHAVIORAL,
    IRRITANT, LIVER, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
    7, PG 345, 1987:GROUP 2B. ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ:MUTAGEN, NERVOUS SYSTEM, REPRODUCTIVE.
    ING 12:LUNG. ING 13:DEVELOPMENTAL, IRRITANT, KIDNEY, LUNG, NERVOUS
    SYSTEM, TERATOGENIC.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INGEST:INDUCE VOMITING. OBTAIN MEDICAL ATTENTION.
    INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN MEDICAL
    ATTENTION. SKIN:FLUSH W/WATER. EYES:FLUSH FOR AT LEAST 15 MINUTES
    W/WATER. OBTAIN MEDIC AL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Lower Limits:SEE ING 13
Upper Limits:SEE ING 13
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN AN INERT ABSORBENT. STORE IN A
    PARTLY FILLED, CLOSED CONTAINER UNTIL DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 110F TO PRESERVE SHELF
    LIFE.
Other Precautions:KEEP AWAY FROM EYES. AVOID PROLONGED SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:SUFFICIENT TO MAINTAIN VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 @ 80F
Spec Gravity:SEE INGS
Solubility in Water:SLIGHT
Appearance and Odor:RESIN:WHITE PASTE; MILD ODOR. HARDENER:BLACK PASTE;
    DISAGREEABLE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZ PRODUCTS FORMED BY FIRE/THERMAL
    DECOMP: IRRITATING ORGANIC VAPOR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE FOLLOWING EPA, FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.