RUST-OLEUM CORPORATION -- ALKYD RESIN - HIGH GLOSS ENAMEL TOPCOATS -  -- 8010-00B180037
<pre>=====================  Product Identification  =====================

Product ID:ALKYD RESIN - HIGH GLOSS ENAMEL TOPCOATS -
MSDS Date:12/18/1989
FSC:8010
NIIN:00B180037
=== Responsible Party ===
Company Name:RUST-OLEUM CORPORATION
Address:11 HAWTHORNE PARKWAY
City:VERNON HILLS
State:IL
ZIP:60061-1583
Country:US
Emergency Phone Num:708-367-7700
CAGE:DO883
=== Contractor Identification ===
Company Name:RUST-OLEUM CORP
Address:11 HAWTHORN PARKWAY
Box:City:VERNON HILLS
State:IL
ZIP:60061-1583
Country:US
Phone:847-367-7700
CAGE:08882
Company Name:RUST-OLEUM CORPORATION
Address:11 HAWTHORNE PARKWAY
City:VERNON HILLS
State:IL
ZIP:60061-1583
Country:US
CAGE:DO883

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:CHRONIC: REPEATED INHALATION EXPOSURE
    MAY LEAD TO STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS OR COMA.
    REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OVEREXPOSURE TO
    SOLVENTS WITH PERMANENT BRAIN AND  NERVOUS SYSTEM DAMAGE.
    ASPIRATION OF THIS MATERIAL INTO THE LUNGS CAN CAUSE CHEMICAL
    PNEUMONITOS WHICH CAN BE FATAL.
Effects of Overexposure:CAUSES SKIN AND EYE IRRITATION, GASTRO-
    INTESTINAL IRRITATION, NAUSEA, VOMITING AND DISRRHEA.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN AND
    RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
    MIN. NOTIFY A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER.
    INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT BREATHING AS
    NECESSARY AND NOTIFY  A PHYSICIAN. INGESTION: DO NOT INDUCE
    VOMITING. GET MEDICAL ATTENTION. ASPIRATION OF THIS MATERIAL INTO
    THE LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:104F,40C
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
    CHEMICAL OR FOAM).
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING SCBA
    SHOULD BE USED. WATER SPRAY MAY BE INEFFECTIVE BUT MAY BE USED TO
    COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELECTRICAL EQUPMENT, SPARKS AND OPEN FLAME. CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, VENTILATE AREA
    AND REMOVE WITH INERT ABSORBENT AND NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. DO NOT
    TAKE INTERNALLY. EMPTY CONTAINERS MAY BE HAZARDOUS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED CHEMICAL CARTRIDGE RESPIRATOR
    (TC23C) TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY AND ORGANIC
    VAPORS DURING SPRAY APPLICATION. IN CONFINED AREAS USE NIOSH
    APPROVED SUPPLIED-AIR  RESPIRATORS OR HOODS (TC19C).
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
    VOLUME AND PATTERN TO KEEP TLV BELOW ACCEPTABLE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES AND/OR CLOTHING.
Eye Protection:SAFETY GLASSES W/SPLASH GUARDS.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
    WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
    CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
    EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:307F,153C
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NOT SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:59-68%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
    OF IGNITION
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.