J-B WELD COMPANY -- 48009 EPOXY STEEL RESIN -- 8040-00F044774
===================== Product Identification ===================== Product ID:48009 EPOXY STEEL RESIN MSDS Date:02/26/1993 FSC:8040 NIIN:00F044774 === Responsible Party === Company Name:J-B WELD COMPANY Address:1130 COMO ST Box:483 City:SULPHUR SPRINGS State:TX ZIP:75483-5000 Country:US Info Phone Num:903-885-7696 Emergency Phone Num:903-885-7696 Preparer's Name:U.S CHEMICAL & PLASTICS CAGE:GO279 === Contractor Identification === Company Name:J-B WELD CO Box:City:SULPHUR SPRINGS State:TX ZIP:75482 Country:US Phone:903-885-7696; 216-455-4311 CAGE:0J942 Company Name:J-B WELD COMPANY Address:1130 COMO ST Box:483 City:SULPHUR SPRINGS State:TX ZIP:75483-5000 Country:US Phone:903-885-7696 CAGE:GO279 ============= Composition/Information on Ingredients ============= Ingred Name:STEEL MANUFACTURE, CHEMICALS *95-3* CAS:65997-19-5 Fraction by Wt: 15-20% Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820, ARALDITE 6004 *95-3* CAS:25068-38-6 RTECS #:KD4380000 Fraction by Wt: 40-50% Ingred Name:SILICA, AMORPHOUS FUMED (IARC CARCINOGEN - GROUP 3) *95-3* CAS:112945-52-5 RTECS #:VV7310000 Fraction by Wt: 1-5% OSHA PEL:0.1 MG/CUM ACGIH TLV:0.1 MG/CUM Ingred Name:CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING CAS:1317-65-3 RTECS #:EV9580000 Fraction by Wt: 35-45% ACGIH TLV:10 MG/CUM (DUST) ===================== Hazards Identification ===================== Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:SKIN/EYES: MAY CAUSE MINOR IRRITATION. Explanation of Carcinogenicity:NONE Effects of Overexposure:IRRITATION. ======================= First Aid Measures ======================= First Aid:SKIN: WASH W/SOAP & EXCESS WATER. EYES: FLUSH W/EXCESS WATER FOR 15 MINS. INGESTION: DON'T INDUCE VOMITING. IF CONSCIOUS, GIVE A GLASS OF WATER TO PERSON. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:SCC Flash Point:>200F Extinguishing Media:CO2, DRY CHEMICALS, FOAM Fire Fighting Procedures:WEAR SCBA. FIGHT LIKE A FUEL OIL FIRE. Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH TEMPS SUCH AS FIRE CONDITIONS MAY RUPTURE. ================== Accidental Release Measures ================== Spill Release Procedures:WASH & CLEAN UP W/WATER & DETERGENT. PICK UP W/INERT ABSORBENT & PLACE IN A CONTAINER FOR DISPOSAL. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE AT AMBIENT TEMPS. Other Precautions:DON'T FLAME CUT, WELD/MELT EMPTY CONTAINERS. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF ROOM VENTILATION IS LACKING, USE NIOSH APPROVED RESPIRATOR. Ventilation:GENERAL ROOM/LOCAL EXHAUST. MECHANICAL (GENERAL): ACCEPTABLE Protective Gloves:NEOPRENE/EQUIVALENT Eye Protection:SAFETY GLASSES/GOGGLES Other Protective Equipment:EYE WASH FOUNTAIN & SAFETY SHOWER. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Density:>1 Spec Gravity:1.17 Evaporation Rate & Reference:(ETHYL ETHER = 1): <1 Solubility in Water:INSOLUBLE Appearance and Odor:DARG GRAY/BLACK SMOOTH PASTE Percent Volatiles by Volume:0 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG ACIDS/ALKALIES Stability Condition to Avoid:OPEN FLAMES, SPARKS & HIGH TEMPS Hazardous Decomposition Products:CO, CO2 ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL METHOD MUST COMPLY W/LOCAL, STATE & FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.