DAP INC -- ACRYLIC LATEX CAULK W/SILICONE (ALL COLORS) -- 8030-00F017745
===================== Product Identification ===================== Product ID:ACRYLIC LATEX CAULK W/SILICONE (ALL COLORS) MSDS Date:03/24/1992 FSC:8030 NIIN:00F017745 === Responsible Party === Company Name:DAP INC Address:5300 HUBERVILLE RD Box:277 City:DAYTON State:OH ZIP:45401-0277 Country:US Info Phone Num:513-667-4461/800-543-3840 Emergency Phone Num:513-667-4461/800-543-3840 CAGE:90300 === Contractor Identification === Company Name:DAP INC. Box:277 City:DAYTON State:OH ZIP:45401-0277 Country:US Phone:513-253-7154/800-543-3840 CAGE:90300 ============= Composition/Information on Ingredients ============= Ingred Name:TRADE SECRET COMPONENT Ingred Name:VOLATILE ORGANIC CONTENT: 14 GM/L LESS WATER LESS EXEMPT SOLVENT; 12 GM/L MATERIAL RTECS #:9999999VO ===================== Hazards Identification ===================== Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:SKIN: PROLONGED/REPEATED CONTACT MAY CAUSE IRRITATION. Explanation of Carcinogenicity:NONE Effects of Overexposure:IRRITATION ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:SCC Flash Point:>200F Extinguishing Media:FOAM, WATER, DRY CHEMICALS Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES. ================== Accidental Release Measures ================== Spill Release Procedures:USE ABSORBENT MATERIAL/SCRAPE UP DRIED MATERIAL & PLACE INTO CONTAINERS. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE AWAY FROM CAUSTICS & OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. Other Precautions:KEEP CONTAINERS FROM EXCESSIVE HEAT & FREEZING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE REQUIRED Ventilation:NORMAL ROOM VENTILATION Protective Gloves:NOT REQUIRED Eye Protection:GOGGLES, SAFETY GLASSES Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Pres:17.5 Vapor Density:<1 Spec Gravity:1.73 Evaporation Rate & Reference:(N-BUTYL ACETATE=1): <1 Solubility in Water:<0.1 Appearance and Odor:COLORED PASTE W/A SLIGHT AMMONIA ODOR Percent Volatiles by Volume:20-25 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS & CAUSTICS Stability Condition to Avoid:EXCESSIVE HEAT, FREEZING Hazardous Decomposition Products:CARBON OXIDES, NITROGEN OXIDES ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.